The software expands Zigbee mesh networking with Bluetooth Beaconing and direct connectivity through smartphone apps. The approach is described as “dynamic multiprotocol” that is, using a single radio, it time-slices sessions of Bluetooth and Zigbee signalling, enabling communication with both standards. Relying in part on the inherent robustness of the Zigbee protocol, with its short packets and ability to re-try messages: and the deterministic aspects of Bluetooth, Silicon Labs says it has extensively verified that real-world connection scenarios maintain connectivity without problems.
A key factor, the company adds, is that all of the work at the protocol level has been done and embedded in its software, simplifying the task for the designer. The software runs on its Wireless Gecko system-on-chip (SoC) and module portfolio, “enabling simultaneous operation of Zigbee and Bluetooth low energy (LE) on a single SoC and bringing together the key application benefits of both protocols.” Compared to a two-chip architecture, a wireless subsystem bill-of-materials (BOM) cost and size can be reduced by up to 40%.
Dynamic multiprotocol software allows users to commission, update, control and monitor Zigbee mesh networks directly over Bluetooth with smartphone apps. The software also makes it easier to deploy scalable indoor location-based service infrastructure by extending Zigbee-based connected lighting and building automation systems with Bluetooth beacons. By adding Bluetooth LE features to Zigbee mesh networks, developers can create next-generation IoT applications that are easier to deploy, use and update. Over-the-air (OTA) updates are supported.
Examples of applications that benefit from Silicon Labs’ multiprotocol software include:
• Smart Lighting – In residential lighting, consumers can use smartphone apps to simplify device installation/setup. Commercial lighting systems based on Zigbee can be extended to transmit Bluetooth beacons to enable indoor location services or asset tracking. Installers and maintenance teams can commission Zigbee devices, update software or perform diagnostics on a specific device via a Bluetooth smartphone or tablet. End users can use smartphones