MENU

Graphene shows promise for more sensitive Hall-effect sensors

Technology News |
By Ally Winning

In their work, the researchers – who specialize in using scanning probes to conduct magnetic imaging – used an ultrathin graphene “sandwich” to create a tiny magnetic field sensor that can operate over a greater temperature range than previous sensors, while also detecting miniscule changes in magnetic fields that might otherwise get lost within a larger magnetic background. One of the researchers’ “go-to” probes, they say, is the superconducting quantum interference device, or SQUID, which works well at low temperatures and in small magnetic fields.

“We wanted to expand the range of parameters that we can explore by using this other type of sensor, which is the Hall-effect sensor,” says doctoral student Brian Schaefer, the lead author of a paper on the research. “It can work at any temperature, and we’ve shown it can work up to high magnetic fields as well. Hall sensors have been used at high magnetic fields before, but they’re usually not able to detect small magnetic field changes on top of that magnetic field.”

The Hall effect is a well-known phenomenon in condensed matter physics. When a current flows through a sample, it is bent by a magnetic field, creating a voltage across both sides of the sample that is proportional to the magnetic field. Conventional semiconductor Hall-effect sensors are used in a variety of magnetic field sensing applications, from cellphones to robotics to anti-lock brakes.

The researchers decided instead to evaluate graphene – single layers of carbon atoms, arranged in a honeycomb lattice – as a promising material system for high-performing Hall sensors. One challenge, they say, was that graphene devices often fall short of those made from other semiconductors when the graphene sheet is placed directly on a silicon substrate; the graphene sheet “crumples” on the nanoscale, inhibiting its electrical properties.

To address this, the researchers adopted a recently developed technique to unlock graphene’s full potential – sandwiching it between sheets of hexagonal boron nitride. Hexagonal boron nitride has the same crystal structure as graphene but is an electrical insulator, which allows the graphene sheet to lie flat. Graphite layers in the sandwich structure act as electrostatic gates to tune the number of electrons that can conduct electricity in the graphene.

“The encapsulation with hexagonal boron nitride and graphite makes the electronic system ultraclean,” says Katja Nowack, assistant professor of physics in the College of Arts and Sciences and the paper’s senior author. “That allows us to work at even lower electron densities than we could before, and that’s favorable for boosting the Hall-effect signal we are interested in.”

As a result, say the researchers, they were able to create a micron-scale Hall sensor that functions as well as the best Hall sensors reported at room temperature while outperforming any other Hall sensor at temperatures as low as 4.2 kelvins (or minus 452.11 degrees Fahrenheit). The graphene sensors are so precise they can pick out tiny fluctuations in a magnetic field against a background field that is larger by six orders of magnitude (or a million times its size) – a challenge for even high-quality sensors since in a high magnetic field the voltage response becomes nonlinear and therefore more difficult to parse.

The researchers say they plan to incorporate the graphene Hall sensor into a scanning probe microscope for imaging quantum materials and exploring physical phenomena, such as how magnetic fields destroy unconventional superconductivity and the ways that current flows in special classes of materials, such as topological metals.

“Magnetic field sensors and Hall sensors are important parts of many real-world applications,” says Nowack. “This work puts ultraclean graphene really on the map for being a superior material to build Hall probes out of. It wouldn’t be really practical for some applications because it’s hard to make these devices. But there are different pathways for materials growth and automated assembly of the sandwich that people are exploring. Once you have the graphene sandwich, you can put it anywhere and integrate it with existing technology.”

For more, see “Magnetic field detection limits for ultraclean graphene Hall sensors.”

Related articles:
Bosch finds graphene magnetic sensor 100x more sensitive than silicon
Topological magnet exhibits exotic quantum effects
Quantum switch turns metals into insulators
New graphene-based recipes spur startups

 


Share:

Linked Articles
eeNews Analog
10s