Wideband I/Q demodulator features IIP2 optimization and DC offset cancellation to boost receiver performance
The I/Q demodulator operates over a wide frequency range from 700 MHz to 3 GHz, covering virtually all cellular base station frequency bands. Unique to this device are two built-in calibration features. One is advanced circuitry that enables the system designer to optimize the receiver’s IIP2 performance, increasing from a nominal 60 dBm to an unprecedented 80 dBm or higher. The other is on-chip circuitry to null out the DC offset voltages at the I and Q outputs. Both serve to enhance receiver performance. Moreover, the LTC5585 delivers excellent P1dB of 16 dBm.
To further enhance its use in direct conversion receiver applications, the LTC5585 offers low I/Q amplitude and phase mismatch. The amplitude mismatch is typically 0.05 dB, while the phase error is typically 0.7 degree, both measured at 1.95 GHz. This combination produces a receiver image rejection capability of 43 dB.
Because of its wide bandwidth capability, the LTC5585 is especially well suited for multimode LTE, W-CDMA and TD-SCDMA base stations DPD receivers as well as for main receiver applications. Particularly for DPD, these latest generation base stations are pushing demodulation bandwidth of over 300 MHz. The LTC5585 can be easily configured to meet these bandwidth challenges. Beyond wireless infrastructure applications, the LTC5585 is ideal for applications in military receivers, broadband communications, point-to-point microwave data links, image reject receivers and long-range RFID readers.
The LTC5585 has an on-chip RF transformer to reduce external components, providing a highly compact solution with its 24-lead 4 mm x 4 mm QFN package. The device is specified for case operating temperature from -40 to 105°C.
Availability and Pricing
The LTC5585 is powered from a single 5 V supply, drawing a total supply current of 200 mA. The device provides a digital input to enable or disable the chip. When disabled, the IC draws typically 11 μA of leakage current. The demodulator’s fast turn-on time of 200 ns and turn-off time of 800 ns enables it to be used in burst mode receivers. The LTC5585 is priced starting at $5.98 each in 1,000-pieces quantities. Production quantities are now immediately available.
More information about the LTC5585 ultrawide bandwidth direct conversion I/Q demodulator at www.linear.com/product/LTC5585