Silicon microfluidics heatsink dissipates over 600W/cm2

February 26, 2019 //By Julien Happich
Silicon microfluidics heatsink dissipates over 600W/cm2
Imec has unveiled a silicon-based compact microchannel heat sink that enables high heat flux dissipation. The heat sink achieves a low total thermal resistance of 0,34K/W to 0.28K/W at less than 2 W pump power, it can be assembled to a high performance chip to cool it.

Imec sees such chip coolers as a possible answer for the heat challenge that the new generation of power electronics and systems in a package are faced with. The downscaling of integrated chips and their packaging is a major trend in the electronics industry. However, with the ever-increasing power density has detrimental heat effects that impact the reliability and performances of the devices. Liquid is more effective in removing that heat compared to air, because of its higher thermal conductivity and specific heat capacity.

Silicon as a material is a relatively good heat conductor. The use of small, parallel, high-aspect-ratio silicon microchannel structures of 32µm wide and more than 260µm deep in imec’s chip cooler further increases the convective heat transfer surface area and the heat transfer coefficient, enabling high heat flux removal. This makes it possible to dissipate over 600W/cm 2, an increase in heat flux by two orders of magnitude compared to classical metal heat sinks, while keeping the component temperature below 100°C.

The key attribute of silicon is that it can realize high-aspect-ratio microstructures at low cost by leveraging massively parallel production processes and can be directly integrated in the semiconductor infrastructure. In the current version, the Si-based microchannel heat sinks are fabricated separately and then interfaced to the back side of a heat-dissipating chip. Using an optimized Cu/Sn-Au interface, imec achieves a very low thermal contact resistance between both parts. Since the fluidic performance and thermal behavior can be predicted with a high degree of accuracy, imec’s microcooler can also be tailored according to external system constraints such as space and liquid supply.

Imec - www.imec.be


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.